- Water Problems
Model: QC 105P (50GPD)
5 Stages Reverse Osmosis Water Purification System
The system can produce 7.5 liter per hour & 189 liters per day.
12 Liter FDA Approved & NSF Standards Water Storage Reservoir
A thin film composite (TFC) high quality 0.0001 Micron Membrane Size
The high pressure switch auto that shuts off the pump and stops water flow once the storage tank is full
System includes Booster Pump with transformer
European design 304 Stainless Steel Faucet
100% Factory Tested Fully assembled and Ready for installation.
Free Delivery & Installation.
Manufacturer URL: http://www.pure-pro.com/qc105-blue.htm
Model: QC 105P (50GPD)
Turn your tap water into pure delicious drinking water for just pennies a day !
While Today's tap water can contain a broad range of impurities and contaminants.
PurePro® Reverse Osmosis systems tackle the broadest spectrum of water impurities possible.
Only RO filtration is capable of reducing impurities ranging from bacteria and viruses to agricultural run-off products like pesticides and fertilizers, to dissolved metals like lead, arsenic and iron.
Studies have shown that RO technology is one of the more effective technologies at reducing trace contaminants like perfluorocarbons and trace pharmaceuticals.
PurePro ® Reverse Osmosis (RO) is recognized as one of the best available technologies for producing best quality drinking water.
It's also the same method used by many bottled water companies to make safe and great tasting water. No other home water treatment system can offer you as much protection and reliability.
Why is reverse osmosis better?
Reverse Osmosis (RO) drinking water systems include mechanical filtration to remove particles, carbon absorption and absorption to remove chloring, taste, odor and chemical contaminants, as well as membrane separation down to 0.0001 microns. RO membranes remove dissolved solids at the ionic level. No other purification system can provide better removal.
Minerals in filtered water:
Ca2+: 34mg/l , Mg2+: 12mg/l, Na+: 22mg/l , K+: 8.5mg/l, CO32-: 10mg/l, SO42-: 0.3mg/l , Cl-: 0.8mg/l , F-: 0.06mg/l.
For more information about mineral filter, please click here. (PurePro® USA Mineral Filter)
Production: USA made 50 GPD/189 Liter/day (or 100 GPD/378 Liter/day)
Reservoir: NSF certified 3.2 gallons/12 liters
Voltage: 220Volt, 50Hz.
Operation pressure: 5 -80 psi
Dimensions: (cm) 37 (L) x 48(H) x 20 (W) - system
(cm) 28 (L) x 28(W) x 35 (H)- tank
Weight: 13 kg - Full System
FDA Approved Polypropylene Made Flat Cap Housing (double o'ring).
Feed water connector.
Drain Saddle Valve.
Four Color Coded 1/4 inch Tubing for System Connection
Treatment Stages of EC 106M-P
(Stage 1) 5 Micron Sediment Filter :
With only five micron rating. It is effective in removing dirt, rust and sand particles.
(Stage 2) Carbon Block Filter:
It takes out 99% of the chlorine and organic chemicals. It provides reduction of taste, odor, and color.
(Stage 3) 1 Micron Sediment Filter :
With only 1 micron rating, provides effective filtration to protect your membrane. It provides for improved membrane performance up to 95% of TDS rejection.
(Stage 4) Reverse Osmosis Membrane:
A thin film composite (TFC) high quality membrane that processes 50 gallons per day. It remove the following hard water contaminants that may be present in your water: lead, cooper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite, nitrate, and selenium.
(Stage 5) Post Carbon filter:
This carbon post filter removes objectionable tastes and odors to enhance the quality of your drinking water. We are using NSF approved post carbon to guarantee the taste of water.
(Stage 6) Mineral Filter:
This filter improves the qualities of clean water by adding necessary for proper human development and health minerals, such as Calcium, Magnesium, Sodium, Potassium and others readily found in many natural mineral waters.
12 MONTHS FULL WARRANTY WITH ALL NECESSARY ACCESSORIES.
CASH, CHEQUE, CREDIT CARD, DEBIT CARD, BKASH, NET BANKING, EASY INSTALLMENT OPTIONS.